PDC4S:\A\AGI - 1911 3 Pack\AGI 308 and 309 - Building the Ultimate 1911 (3 of 4) |
Up one directory... |
|
01 - Title.avi | 1,948 KB | 8/28/2012 5:59 PM |
02 - Introduction.avi | 49,452 KB | 8/28/2012 8:15 PM |
03 - Designing your pistol.avi | 43,282 KB | 8/28/2012 8:32 PM |
04 - Choosing options.avi | 39,942 KB | 8/28/2012 8:36 PM |
05 - Fitting the slide to the frame.avi | 181,444 KB | 8/28/2012 7:03 PM |
06 - Fitting the barrel.avi | 302,718 KB | 8/28/2012 6:11 PM |
07 - The acc-u-rail system.avi | 21,270 KB | 8/28/2012 5:52 PM |
08 - Cutting the lugs.avi | 116,760 KB | 8/28/2012 9:23 PM |
09 - Fitting the link.avi | 112,630 KB | 8/28/2012 9:39 PM |
10 - Reaming the Chamber and Headspacing.avi | 85,038 KB | 8/28/2012 4:05 PM |
11 - Ramping and Polishing the barrel.avi | 80,890 KB | 8/28/2012 4:23 PM |
12 - Installing a reverse plus and guide rod.avi | 75,770 KB | 8/28/2012 3:09 PM |
13 - Tuning the extractor.avi | 155,632 KB | 8/28/2012 7:51 PM |
14 - Installing the firing pin.avi | 19,196 KB | 8/28/2012 5:52 PM |
15 - Selecting and fitting the trigger.avi | 65,534 KB | 8/28/2012 3:39 PM |
16 - Fitting the safety.avi | 53,252 KB | 8/28/2012 10:30 PM |
17 - Installing the plunger assembly.avi | 28,698 KB | 8/28/2012 6:55 AM |
18 - Installing the ejector.avi | 87,046 KB | 8/28/2012 4:01 AM |